Rear Convertible Top Seal, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Bring the convertible top into its service position. Refer to Position : 2 and Position : 1 .
-- Remove the end piece -4- of the convertible top seal from the retaining strip -3-.
-- Remove the convertible top seal -2- from the retaining strip.
-- Loosen the retaining studs -1- from the retaining strip.
-- Remove the convertible top cover connection -5- from the retaining strip -6- and carefully remove the convertible top seal -arrow-.
-- Remove the convertible top seal -7- on the tensioning bracket -8- and remove.