Tire Pressure Monitoring System, Storing Changed Tire Pressure Values

During each inspection (after check or adjustment of tire pressures) or after a wheel is changed, the Tire Pressure Monitoring System must be initialized.

Requirements:

• Before storing, the driving tire pressures must be correctly adjusted.

Procedure:

-- Turn on the ignition and activate the MMI.

-- Press the MENU  function button.

-- Select >>vehicle<<.

-- Select the left control button and follow the following menu structure.

• Service & Checking
• Tire Pressure Monitoring System
• Tire Pressure, Storing
• yes, save now

-- Activate the storing of tire pressures using the MMI control knob.