Front Axle
Control Arm and Guide Link, Coupling Rod:
-- Check the relative movement between the wheel bearing housing and the control arm or guide link.
-- Control arm and guide link: check all around the ball joint boots -arrows- of the ball joint for damage and proper seating.
-- Check the ball joints for play.
-- Check all the control arm and guide link bonded rubber bushings -arrows- for play.
-- Check the coupling rod -1- for play.
Tie Rod End:
-- Check all around the tie rod end ball joint boot -2- for damage and correct seating.
-- Check the tie rod end for play.
Upper Control Arm:
-- Upper control arm -2- : check all around the ball joint ball joint boots for damage and correct seating.
-- Check the ball joints for play.
-- Check both bonded rubber bushings -1 and 4- on the upper control arm for play.
Stabilizer Bar:
-- Check the stabilizer bar bearing -3- for damages.
Drive Axle and Steering Gear:
-- With the steering locked: check all around the drive axle ball joint boots -arrows- for damage and proper seating.
-- Check all around the ball joint boot -arrow- of the steering gear for damage and proper seating.
-- Repeat the component checks on the opposite side of the vehicle.
-- If a defect was found when inspecting the specified components, replace the respective component.