Testing Values and Process Specifications Table:
WARNING: This page is about a different variant/trim than selected.
| Freeze protection down to: | Coolant additive: | Water: |
|---|---|---|
| -25 °C (-13 °F) | approximately 40 % | approximately 60 % |
| -36 °C (-33 °F) | approximately 50 % | approximately 50 % |
Procedure:
-- Fill the missing amount in the mixture ratio which corresponds to the freeze protection specification in the Maintenance Table. Observe the coolant mixture according to the table.
NOTE:
Small quantities of coolant can be added. When larger quantities of coolant are needed, the Cooling System Charge Kit:VAS6096 should be used.