Terminal 30 Wire Junction 2 -TV22-: Removing

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING (2.0L) , AIR FILTER HOUSING, REMOVING AND INSTALLING (3.0L) .

-- Release the retainers in the direction of the -arrows-.

-- Open the cover in the sequence -2 and 1-.

-- Remove the wires -1, 2 and 5- and free them up.

Fig 1: Terminal 30 Wire Junction 2 -TV22 Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4-.

-- Remove the wire junction -3- upward.