Pinion, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
 Courtesy of AUDI OF AMERICA, LLC
|
Special tools and workshop equipment required
- Spindle from Puller (Kukko 18/2):VAS 251 419
- Subframe Bushing Tool Kit:3301
- Press Piece - Front Wishbone:3160
- Support Bridge:2011
- Bearing Installer - Front Wheel Bearing:3110
- Hot Air Blower:V.A.G 1416
or Wiring Harness Repair Set - Hot Air Blower: VAS 1978/14A
 Courtesy of AUDI OF AMERICA, LLC
|
- Press Piece - Multiple Use:VW 519