Plenum Chamber Cover, Removing And Installing: Removing

-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .

-- Carefully remove the drip rail -1- in the area of the plenum chamber cover upward -arrow-.

Courtesy of AUDI

-- Remove the seal -1-.

Courtesy of AUDI

-- Coat the transition between the windshield -2- and the plenum chamber cover -5- with some soapy water. Starting at the window edge, carefully remove the plenum chamber cover vertically upward from the retainer on the windshield.

-- Remove the plenum chamber cover -5- by carefully removing the plenum chamber cover tab -4- in the -direction of the arrow- from the windshield mount -3-.