Overview - Dynamic Steering
WARNING: This page is about a different variant/trim than selected.
- Steering Gear
- With Electromechanical Power Steering Motor -V187- and Power Steering Control Module -J500-
- Active Steering Motor -V477-
- Steering column component
- Do not disconnect or loosen from the steering column
- Replace the steering column if faulty. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
- Steering Column
- Overview. Refer to OVERVIEW - STEERING COLUMN .
- Perform the basic setting after replacing. Refer to DYNAMIC STEERING BASIC SETTING
- Active Steering Safety Lock Actuator -F437-
- Removing and installing. Refer to ACTIVE STEERING SAFETY LOCK (LOCKING SOLENOID), REMOVING AND INSTALLING .
- Active Steering Control Module -J792-
- Component location: in front of the driver seat
- Removing and installing. Refer to Active Steering Control Module -J792-, REMOVING AND INSTALLING .
- Perform the basic setting after replacing. Refer to DYNAMIC STEERING BASIC SETTING
- Bracket
- For the Active Steering Control Module -J792-
- Bolt
- 8 Nm
- Nut
- 6 Nm