Bumper Cover Trim Molding, Removing And Installing, A5 S Line, S5, From Product Improvement: Removing

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- S line: remove the tail pipe trim mount. Refer to the appropriate Service Information .

-- Release the catches -arrows- and remove the side trim molding -1- from the lower section of the bumper cover -2-.

Courtesy of AUDI

-- Remove the lower section of the bumper cover. Refer to the appropriate Service Information .

Courtesy of AUDI

-- Release the catches -arrows- and remove the center trim molding -2- from the lower section of the bumper cover -1-.