PROTECTIVE HOUSING FOR Battery, 48 V -A6-, REMOVING AND INSTALLING, 0K4 AND VH2: Removing

-- Remove the Battery, 48 V -A6-. Refer to Battery, 48 V -A6-, REMOVING AND INSTALLING, 0K4 AND VH2 .

-- Remove the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front crashpad -1- with retaining bracket -2-.

-- Remove the pressure vent tube -4- by pressing the catches on both sides together in the direction of the -arrows- and free up at the protective housing -5-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear crashpad -1- with retaining bracket -2-.

-- Remove the bolts -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover plate -6-.

-- Loosen the bolts -4- for the retaining bracket -5- four turns.

-- Remove the Battery, 48 V -A6- -3- from the protective housing -2-.

• Follow the disposal regulations for batteries when disposing of them. Refer to Battery .