Overview - Battery Jump Start Terminal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Battery Jump Start Terminal With Components

GWWA27-10486

Courtesy of AUDI OF AMERICA, LLC

Cap
Suppressor -C24-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANEL, INSTRUMENT PANEL, E-BOXES ENGINE COMPARTMENT .
Bolt
- Tightening specification -Item 10- COMPONENT LOCATION OVERVIEW - RELAY PANEL, INSTRUMENT PANEL, E-BOXES ENGINE COMPARTMENT .
Terminal 30 Wire Junction -TV2-
- With jump start point
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANEL, INSTRUMENT PANEL, E-BOXES ENGINE COMPARTMENT .
Bolt
- Tightening specification -Item 10- COMPONENT LOCATION OVERVIEW - RELAY PANEL, INSTRUMENT PANEL, E-BOXES ENGINE COMPARTMENT .
Positive Terminal
- 18 Nm
Connector
Negative Terminal
- 9 Nm
Suspension Strut Tower