Drain and Plug

WARNING: This page is about a different variant/trim than selected.

Fig 1: Transmission Fluid Circuit Components Location

Courtesy of AUDI OF AMERICA, LLC

Plugs
- Replace after removing
- Tighten all the way
- For the ATF check and fill hole
Plug
- For the transmission fluid inspection and fill hole
- Tightening Specification. Refer to -item 2- OVERVIEW - TRANSMISSION FLUID CIRCUIT.
Transmission Fluid Pump (MTF Pump)
- Must be removed for draining the transmission fluid (MTF). Refer to TRANSMISSION FLUID PUMP, REMOVING AND INSTALLING .
Bolt
- Tightening Specification. Refer to -item 4- OVERVIEW - TRANSMISSION FLUID CIRCUIT.
Plug/Plugs
- Replace after removing
- Tighten all the way
- For the ATF