LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 352 (Turbocharger, Supercharger (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Convertible)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Turbocharger, Removing And Installing >> Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine >> Removing

Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper air duct pipe (refer to AIR DUCT PIPE, REMOVING AND INSTALLING ) and pivot to the left side.

-- Remove the Engine Control Module -J623-. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the connector -arrow-.

GWWA10-12243Courtesy of AUDI OF AMERICA, LLC

-- Free up the coolant line -3- and wiring harness.

Fig 1: Identifying Brakelines, And ABS Hydraulic Unit -N55-
GWWA15-11893Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .