Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING, 3.0L ENGINE: Installing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Check the O-ring for damage. Refer to OVERVIEW - CHARGE AIR SYSTEM, 3.0L ENGINE .
- If the catch on the air duct pipe is broken, secure the Charge Air Pressure Sensor -G31- with a bolt. Refer to the appropriate Parts Information.