Engine Support, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Left Engine Support:
-- Remove the bolts -arrows- and the engine support -1-.
Right Engine Support:
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the right drive axle cover. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove the bolts -arrows- and push the right coolant pipe slightly to the side. (On vehicles with 3.0L engine).
-- Remove the bolts -arrows- and the engine support -1-.