LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Convertible)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING, 3.0L ENGINE >> Removing

Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING, 3.0L ENGINE: Removing

WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the upper air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING, 3.0L ENGINE .

-- Remove the bolts -arrows- and remove the left front coolant pipe from the coolant pump.

GWWA19-12531Courtesy of AUDI OF AMERICA, LLC

All additional procedures are described. Refer to COOLANT PUMP/COOLANT THERMOSTAT .