Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING, 2.9L ENGINE: Removing

WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 1: Coolant Recirculation Pump -V50- - Component Location, 2.9L Engine

Courtesy of AUDI OF AMERICA, LLC

-- Push the heat shield slightly upward.

-- Loosen the hose clamps -2- to clamp off the coolant hoses with the :3094 and remove them.

-- Remove the bolt -arrow- and remove the Coolant Recirculation Pump -V50- with bracket.

-- Remove the bolts -arrows- and remove the coolant pump -2- from the bracket -1-.

Courtesy of AUDI OF AMERICA, LLC