LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Convertible)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Electric Coolant Pump, Removing And Installing >> Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, 2.9L ENGINE >> Removing

Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, 2.9L ENGINE: Removing

WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .

-- Remove the front left wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Install the lower bumper cover on the lock carrier. Refer to OVERVIEW - BUMPER COVER .

-- Disconnect the connector -3-.

Fig 1: Charge Air Cooling Pump -V188- - Component Location, 2.9L Engine
GWWA19-12737Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the retaining bracket.

-- Place the container of the :VAS5014  or :VAS6208  underneath.

-- Loosen the clamps -2- and remove the coolant hoses.