Right Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the ground cable from the battery terminal. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the right drive axle cover and right front wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove the generator. Refer to .
-- Remove the bolt -arrow- and move the bracket -1- and wiring harness to the side.
-- Place the container of the :VAS5014 or :VAS6208 underneath.
-- Loosen the hose clamps -1 and 2- and remove the coolant hoses.
-- Remove the bolts -arrows- using the :T10405 and remove the coolant pipe. (On vehicles with 3.0L engine).