Special Tools
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Piece - Front Control Arm:2040
- Puller - Camshaft Seal:3240
- Bearing Installer - Carrier Bearing:3350
- Used Oil Collection and Extraction Unit:SMN372500
- Seal Installer - Final Drive/Gearbox:T10139
- Engine/Gearbox Jack - Gearbox Support:T10337
- Puller - Crankshaft/Power Steering Seal:T20143/1
- :T20143/1
- Seal Installer - Flange Shaft:T40163
- Seal Installer - Output Shaft:T40239
- Used Oil Collection and Extraction Unit:SMN372500
- Circlip Pliers:VAS5503A
- Scissor Lift Table - Audi Set:VAS6131/10
- Scissor Lift Table - Audi Set - Support Tapers:VAS6131/10-3
- Scissor Lift Table - A6 Set - Adapters:VAS6131/12-1 from Scissor Lift Table - A6 Set:VAS6131/12 , not illustrated
- Pressurized Gearbox Oil Filler Kit:VAS6617
- :VAS6617/2
- :VAS6617/6
- Engine and Gearbox Jack:VAS6931
- Press Plate:VW401
- Press Plate:VW402
- Press Piece - Rod:VW409
- Press Piece - Multiple Use:VW412
- Press Piece - 60mm:VW415A
- Press Piece - Bushing - 50mm Diameter:VW432
- Slide Hammer Set:VW771
- Slide Hammer Set - Pin:VW771/43
- Spindle:VW771/45