Right Seal, Replacing: Installing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Lightly oil the outer edge of the new seal.
-- Drive in the seal all the way without tilting using the :T40163 .
-- Fill the space between the sealing/dust lip halfway with Sealing Grease:G 052 128 A1 .
-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .