Right Flange Shaft, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Place the :SMN372500 under the transmission.
-- Versions with M12 threads: place the :VW771 with :VW771/43 on the flange shaft, as shown.
-- Versions with M14 threads: place the :VW771 with :VW771/43 and :VW771/45 on the flange shaft, as shown:
-- Remove flange shaft.