Right Flange Shaft, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the circlip after removal.
-- Insert the circlip -1- with the :VAS5503A .
-- Check the right flange shaft seal for damage and replace if necessary. Refer to RIGHT SEAL, REPLACING .
-- Fill the space between the sealing/dust lip halfway with Sealing Grease:G 052 128 A1 .
-- Insert the right flange shaft.
-- Fill the transmission fluid and check the level. Refer to GEAR OIL, DRAINING AND FILLING, FRONT FINAL DRIVE, TRANSMISSION WITH SEPARATED OIL SYSTEM .