Left Flange Shaft, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace bolts that were tightened with an additional turn after removing them.
-- To avoid damaging the seal, support and guide the flange shaft -arrow- when installing through the opening in the transmission.
-- Slide the left flange shaft -2- into the transmission in direction of -arrow B-. When doing this, insert the flange shaft centrally into the seal on the front differential -arrow 3-.
- Do not damage the seal -arrow 3-.
-- Install the shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .
-- Install the ATF cooler. Refer to ATF COOLER, REMOVING AND INSTALLING .