Overview - Assembly Mounts
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 55 Nm
- Tunnel Crossmember
- There are different versions depending on the model
- Removing and Installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
- Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Transmission Support
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0 or TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.9, 3.0 .
- Bolt
- 40 Nm
- Transmission Mount
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.0 or TRANSMISSION MOUNT, REMOVING AND INSTALLING - 2.9, 3.0 .
- Stop
- For the transmission mount
- Bolt
- 20 Nm + 90°
- Always replace
- Only remove if the transmission mount must be separated from the transmission support
- Nut
- 20 Nm