Component Location Overview - Drain And Check Plugs
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- ATF Drain Plug
- Tighten all the way
- O-Ring
- Always replace
- Drain Plug
- 12 Nm
- Always replace
- For the transmission fluid inside the transfer case
- Plug
- 27 Nm
- Always replace
- For the inspection and fill hole for gear oil in the transfer case
- Plug
- 30 Nm
- Always replace
- For the ATF check and fill hole
- Plug
- 27 Nm
- For the inspection and fill hole for gear oil in the front final drive
- Drain Plug
- 10 Nm
- For the gear oil inside the front final drive