ATF Lines, Removing And Installing: Cleaning
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Before installing a replacement transmission, always clean out the ATF cooler and ATF lines using compressed air (maximum 10 bar (145 psi)).
-- Place the :SMN372500 under the transmission.
- If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.
Tightening Specifications
- Refer to OVERVIEW - ELECTRIC COOLANT PUMP - 2.0 or OVERVIEW - ELECTRIC COOLANT PUMP - 2.9, 3.0 .
- Refer to OVERVIEW - NOISE INSULATION .