ATF Cooler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S5 and 2023 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps corresponding to series production. Refer to the Parts Information.
-- Connect the ATF line all the way and secure using the clips.
- Any leaking ATF lines must be replaced.
- Replace bent or stretched clips.
- The clips must be secure.
-- Check the ATF level. Refer to ATF LEVEL, CHECKING .