Intake Manifold, Removing And Installing, 3.0L Engine, AUDI A4/A5/A6/A7/Q5: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Pay attention to the repair information. Refer to REPAIR INFORMATION .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the lock carrier cover. Refer to Front Bumper .

Audi A4/A5:

Courtesy of AUDI

-- Remove the bolts -arrows- and the air guide -2-.

Audi A6/A7

Courtesy of AUDI

-- Remove the bolts -arrows- and the air duct.

Audi Q5:

Courtesy of AUDI

-- Remove the bolts -arrows- and air duct -1-.

All:

Courtesy of AUDI

-- Loosen the hose clamp -2- and remove the air duct pipe.

-- Free up the wiring harness -3-.

-- Remove the bolts -arrows-.

-- Remove the intake manifold and crankcase ventilation hose -1- by pressing the release buttons on both sides.

-- If installed, remove the hose -1- for the EVAP system by pushing the release buttons on both sides.

Courtesy of AUDI

-- Remove the crankcase ventilation hose -arrows- by pressing the release buttons on both sides.

-- Remove the intake manifold.