Cam Actuator, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Cylinder Bank 1 (Right) Cam Actuator, Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

All additional procedures are described. Refer to CAMSHAFT, REMOVING AND INSTALLING .

Cylinder Bank 2 (Left) Cam Actuator, Removing

Fig 1: Identifying Brakelines, And ABS Hydraulic Unit -N55-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Engine Control Module -J623- from the bracket and move to the side. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the coolant line -3- and wiring harness -2-.

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described. Refer to CAMSHAFT, REMOVING AND INSTALLING .

Installing

Additional procedures:

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - ENGINE CONTROL MODULE