LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 327 (Turbocharger, Supercharger (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Coupe)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Turbocharger, Removing And Installing >> Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine >> Removing

Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper air duct pipe (refer to AIR DUCT PIPE, REMOVING AND INSTALLING ) and pivot to the left side.

-- Remove the Engine Control Module -J623-. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the connector -arrow-.

GWWA10-12243Courtesy of AUDI

-- Free up the coolant line -3- and wiring harness.

Fig 1: Identifying Brakelines, And ABS Hydraulic Unit -N55-
GWWA15-11893Courtesy of AUDI

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .