LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Crankshaft, Cylinder Block (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Coupe)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Vibration Damper, Removing And Installing, 2.9L Engine >> Removing

Vibration Damper, Removing And Installing, 2.9L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator with fan shroud. Refer to RADIATOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the bolt -arrow-.

GWWA19-12720Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -1-, remove the coolant hose and push the front coolant pipe on the lower left side to the side.

All additional procedures are described. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals