Belt Pulley Side Sealing Flange, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING, 3.0L ENGINE .
-- Remove the air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING, 3.0L ENGINE .
-- Disconnect the connector -3- and remove the Cylinder Head Coolant Valve -N489- from the bracket -2-.
-- Disconnect the connector -1-.
-- Remove the bolts -arrows- and tie up the bracket to the side.
All additional procedures are described. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .