Radiator Shutter, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the impact member. Refer to the appropriate Service Information .
WARNING:
Risk of injury due to involuntary deployment.
- Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Equipment version with pedestrian protection: disconnect the connector -1- from the pedestrian protection crash sensor and free up the wiring harness -2-.
-- Disconnect and free up the connector -3-.
-- Remove the left and right bolts -arrows-.
-- Push the mounting bracket -2- with the release cable for the release lever hook in the direction of the lock carrier.
-- Remove the radiator shutter -1- toward the front.