LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Coupe)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Electric Coolant Pump, Removing And Installing >> Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, 2.9L ENGINE >> Removing

Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, 2.9L ENGINE: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .

-- Remove the front left wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Install the lower bumper cover on the lock carrier. Refer to OVERVIEW - BUMPER COVER .

-- Disconnect the connector -3-.

Fig 1: Charge Air Cooling Pump -V188- - Component Location, 2.9L Engine
GWWA19-12737Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and remove the retaining bracket.

-- Place the container of the :VAS5014  or :VAS6208  underneath.

-- Loosen the clamps -2- and remove the coolant hoses.