LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) (Coupe)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Large Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine >> Removing

Large Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .

-- Remove the right catalytic converter (refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING ) move with the heated oxygen sensor connected to the side and secure, to do so free up the wire.

-- Remove the bolts -1 and 2- and remove the coolant pipes from the turbochargers.

GWWA19-12741Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

GWWA19-12740Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -3- and remove the coolant pipe -1-.