LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (Crankshaft, Cylinder Block (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine) (Coupe)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Starter Generator Bracket, Removing And Installing >> Removing

Starter Generator Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the bracket -1-.

Fig 1: Starter Generator Bracket -1- - Tightening Specifications and Tightening Sequence
GWWA13-11294Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals