Overview - Balance Shaft
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 40 Nm +45°
- Replace after removing
- Gear
- With the chain sprocket for the camshaft timing chain
- Bolt
- 9 Nm
- Balance Shaft
- Removing and Installing. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Balance Weight
- Can only be placed on the balance shaft in one position
- Bolt
- 40 Nm +90°
- Replace after removing
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Thrust Washer
- Seal
- Replace after removing
- Gear Carrier