Gear Oil Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Place a cloth underneath to catch any leaking coolant.

Fig 2: Front Final Drive Cooler, Tightening Specification

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses with :3094 .

-- Loosen the clamps -1- and remove the coolant hoses.

-- Place the :SMN372500 under the transmission.

-- Remove bolt -3-, remove front final drive cooler -4-.