Right Flange Shaft, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right drive axle. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Place the :SMN372500 under the transmission.
-- Versions with M12 threads: place the :VW771 with :VW771/43 on the flange shaft, as shown.
-- Versions with M14 threads: place the :VW771 with :VW771/43 and :VW771/45 on the flange shaft, as shown:
-- Remove flange shaft.