3. Checking the Transmission Range Indicator
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Test step 3.1
- Engine is running.
-- Engage the positions "P", "R", "N", "D/S" and "+/-" one after the other.
The respective selector lever position must be significantly brighter than the other drive gear symbols.
Test step 3.2
- Engine is running.
-- Engage the "P" position to do so press the button -3-.
The P symbol in the button in the selector lever handle must light up in white as a function lamp.
The P symbol in the Selector Lever Transmission Range Display -Y5- -1- as a function lamp must be red.
In all other selector lever positions it must not be illuminated.