Selector Lever Boot On Selector Lever Handle, Disconnecting And Assembling
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Separating
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Release the catches in direction of -arrows- and remove the selector lever boot -1- from the selector lever handle.
Assembling
-- Push the selector lever boot until it engages audibly on the selector lever handle.
- The tab -2- on the selector lever boot must engage in the opening -1- in the selector lever handle -arrow-.
-- Install the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .