Parking Lock Emergency Release Cable, Removing And Installing, A4/A5: Removing
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the parking brake button to activate the electro-mechanical parking brake.
-- Remove the selector mechanism. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
-- Remove the noise insulation.
-- Remove the nuts -1 and 3- and free up the mount -2- for the emergency release.
-- Release the catches in direction of -arrows- and lower the bracket -4- for the emergency release.
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the tunnel heat shield. Refer to OVERVIEW - HEAT SHIELDS .
-- Remove the bolts -arrows- and free up and remove the parking lock emergency release cable -1-.