ATF Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S5, 2024 Audi RS 5, 2023 Audi S5, and 2023 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
- Rear noise insulation, A4/A5
- Center noise insulation, Q5
-- Place the :SMN372500 under the transmission.
-- Disconnect the ATF lines -1 and 4-. Refer to Figure.
-- Place a clean cloth under the separating point to catch the escaping coolant.
-- Loosen the hose clamps -2 and 3- and then disconnect and remove the coolant hoses with :3094 .
-- Remove the bolts -arrows- and remove the ATF cooler.