LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4)) (Convertible) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

-- Insert the Counterhold - Flywheel:10 - 201  to loosen the bolts.

GWWA13-11063Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damaging the outer surface of the bearing flange at the drive plate if using unsuitable tools.

- Use an internal multi-point socket with a shaft that is at least 40 mm long to loosen and tighten the drive plate bolts.

-- Remove the bolts and remove the drive plate -1-.