Vibration Damper, Removing And Installing, Version 1, Vehicle With Starter Generator: Notes

Vibration Damper, Version 1. Refer to Figure.

Special tools and workshop equipment required 

• Counterhold:T40378 
  Fig 1: Counterhold T40378

  Courtesy of AUDI OF AMERICA, LLC
• Vibration Damper Assembly Tool:T10531 
  Fig 2: Assembly Tool Set T10531

  Courtesy of AUDI OF AMERICA, LLC
• Vibration Damper Assembly:T10531/5-/6 
  Fig 3: Vibration Damper Assembly

  Courtesy of AUDI OF AMERICA, LLC

• The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.
  Fig 4: Locating Vibration Damper Bolt

  Courtesy of AUDI OF AMERICA, LLC