Overview - Engine Oil Cooler

Fig 1: Exploded View Of Engine Oil Cooler Components

Courtesy of AUDI OF AMERICA, LLC

Sub-Assembly Bracket
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
- Removing and Installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Seal
- Replace after removing
O-Rings
- Replace after removing
- coat with engine oil
Mechanical Switch Valve
- Removing and Installing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
Engine Oil Cooler
- Removing and Installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Bolt
- Replace after removing
- 8 Nm +45°