Overview - All-Wheel Drive Clutch

All information for the all-wheel drive clutch -1- can be found in the repair information. Refer to All-Wheel Drive Clutch .

Fig 1: All Wheel Drive Clutch Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. All Wheel Drive Clutch
   • Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
   • Servicing. Refer to All-Wheel Drive Clutch .
   • ATF fluid level, checking. Refer to OIL LEVEL, CHECKING .
2. Bleeder
3. Bolt
   • Quantity: 3
   • M8 X 70
   • Replace after removing
   • 8 Nm +180°
4. Balance Weight
   • Installed depending on the version
5. Bolt
   • Installed depending on the version
   • 28 Nm
6. Bolt
   • Installed depending on the version
   • 28 Nm
7. Heat Shield
   • For driveshaft
   • Installed depending on the version
8. Heat Shield
   • For the All-Wheel Drive Control Module -J492-
   • Installed depending on the version
9. Bolt
   • Installed depending on the version
   • 8 Nm
10. Bolt
    • M8 X 100
    • Replace after removing
    • 8 Nm +180°
11. O-Ring
    • For the All-Wheel Drive Control Module -J492-
    • Replace after removing
12. O-Ring
    • For the All-Wheel Drive Control Module -J492-
    • Replace after removing
13. All-Wheel Drive Control Module -J492-

    The following are integrated in the All-Wheel Drive Control Module -J492- :

    • All-Wheel Drive Clutch Actuator -V622-
    • All-Wheel Drive Clutch Position Sensor -G969-
    • Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
14. Bolt
    • 21 Nm