Overview - Differential

Fig 1: Differential Exploded View

Courtesy of AUDI OF AMERICA, LLC

Left Flange Shaft Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
Shim
- Behind the taper roller bearing outer race
Taper Roller Bearing Outer Race
Front Differential
Bolt
- Replace after removing
- Tightening specification and sequence. Refer to OVERVIEW - DIFFERENTIAL .
Circlip
- Replace
Right Flange Shaft
- Removing and installing. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .
Right Flange Shaft Seal
- Replacing. Refer to RIGHT SEAL, REPLACING .
Final Drive Cover
- Removing and installing. Refer to LEFT SEAL, REPLACING .
O-Ring
- Replace after removing
Shim
- Behind the taper roller bearing outer race
Taper Roller Bearing Outer Race
Left Flange Shaft
- Removing and installing. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .
Bolt
- 10 Nm +90°
- Replace after removing
- Quantity: 3
Gear Carrier
- Attached to the left flange shaft with the bearing -item 16- and the circlip -item 17-
Bearings
- For the left flange shaft
Circlip
- For the left flange shaft bearing