Flange Shaft Protective Ring, Replacing, 0DB, 0D2 And 0G1 / 0G2

Special tools and workshop equipment required

Press Plate:VW 401

Fig 1: Press Plate
Courtesy of AUDI OF AMERICA, LLC
Press Plate:VW 402

Fig 2: Press Plate VW402
Courtesy of AUDI OF AMERICA, LLC
Press Piece - Multiple Use:VW 412

Fig 3: Identifying Press Piece - Multiple Use VW412
Courtesy of AUDI OF AMERICA, LLC
Press Piece - Deflection Ring:T40089/1

Fig 4: Assembly Tool T40089/1 And Assembly Tool T40089/2
Courtesy of AUDI OF AMERICA, LLC
Thrust Piece:T10526
-3- Separating Tool - 22 to 115mm, for example Splitter:VAS251411

Fig 5: Commercially Available Puller Set
Courtesy of AUDI OF AMERICA, LLC

Removing the protective ring A from the flange shaft

Fig 6: Identifying Separating Tool

Courtesy of AUDI OF AMERICA, LLC

B -

Separating Tool, for exampleSplitter:VAS251411

Installing the protective ring 1 on the flange shaft

Fig 7: Installing the protective ring -1- on the flange shaft

Courtesy of AUDI OF AMERICA, LLC

Installation position: the larger outer diameter of the protective ring faces toward the flange.